IX-WATER-LINE Water-Line Components Specifications, Operation & Selection Guide
Water-line components combine pressure regulation, medication housing, square pipe, nipple mounts and support parts into a serviceable poultry drinking circuit.
What is IX-WATER-LINE?
IX-WATER-LINE is an IXORTA water-line components. Water-line components combine pressure regulation, medication housing, square pipe, nipple mounts and support parts into a serviceable poultry drinking circuit. Its principal catalogue values are Core components: Water Matic, nipple bodies, spring bowl, PVC muff and square pipe; Pipe section: 22 × 22 mm square PVC.
Start with the IXORTA Poultry & Feed product range, then use this model page to assess fit, operating needs and the information required for a quotation.
IX-WATER-LINE catalogue specifications
The values below come from the supplied 2026 IXORTA catalogue. Use them to build an initial shortlist, then confirm the exact configuration, options and acceptance criteria in the model-specific quotation.
| Core components | Water Matic, nipple bodies, spring bowl, PVC muff and square pipe |
|---|---|
| Pipe section | 22 × 22 mm square PVC |
| Pipe lengths | 3 m and 6 m catalogue options |
| Configuration | Project designed |
Before ordering: confirm the duty, usable capacity, overall dimensions, utilities, safety package, controls, attachments and documentation for the destination market. Download the division catalogue.
Where IX-WATER-LINE sits in the range
IX-WATER-LINE sits between the smaller and larger configurations in this 7-model range, making side-by-side specification comparison especially important.
Shortlist this model when the planned duty is close to its listed values. If the application regularly approaches a limit, compare the adjacent models below and ask IXORTA to check working margin, cycle expectations and future capacity.
How the IX-WATER-LINE works
Filtered inlet water passes through the regulator and optional medicator, then along supported square pipe to nipples and end flushing points.
The safe sequence depends on the supplied guards, controls, utilities and attachments. Operators should follow the delivered manual, training and site risk assessment. For process examples and planning articles, continue to the IXORTA Poultry & Feed industry guides.
Manufacturing and acceptance checks
Check regulator response, material compatibility, pipe joints, muff and spring-bowl fit, support spacing, seals and pressure tests.
A useful factory-acceptance record identifies the agreed configuration, principal components, inspection points, test material or load, observed results, open actions, documentation set, packing method and release approval. See IXORTA Poultry & Feed project scopes for the wider delivery context.
Applications and selection questions
Typical applications
- cage drinking lines
- floor-house nipple lines
- medication circuits
- replacement line sections
Confirm before selection
- line length
- bird type
- inlet pressure
- medication need
- pipe and nipple compatibility
- flushing route
A catalogue capacity alone is not enough. IXORTA should receive the normal and peak operating range, site conditions, utilities, operator experience, destination and delivery constraints before recommending a configuration. Review the division buyer FAQs before sending the enquiry.
Practical working sequence
- Define the job. Record material, load, output, quality and environmental requirements.
- Inspect before start. Check guards, fluids, fasteners, tooling or attachments, connections and the work area.
- Set the equipment. Apply the model manual, verified program or calibrated field setting.
- Prove at low risk. Run a dry cycle, first part, clean-water test or short field pass as appropriate.
- Monitor production. Watch load, sound, temperature, quality, flow, alignment and safety devices.
- Close and record. Isolate safely, clean, inspect wear and log service actions.
Use the project enquiry form to identify any required training, commissioning or operator documentation.
Maintenance priorities
- clean regulator and filters
- inspect pipe joints
- flush dead ends
- replace damaged supports
Intervals depend on operating hours, duty, dust, heat, water quality and the surrounding environment. The delivered manual and component schedules control the final service plan. Send spare-parts and service questions through the IXORTA contact page.
Project planning for Saudi Arabia, the UAE, Iraq and hot-climate markets
Confirm bird type and age, house dimensions, summer design temperature, power and water reliability, ventilation duty, feed storage, emergency operation, automation level, biosecurity, inland route and installation responsibilities.
For a useful export quotation, include the destination port, inland route, unloading equipment, site access, local standards, document language, commissioning responsibility and critical spare-parts expectation. Browse regional project examples.
Request a IX-WATER-LINE quotation
Send the intended application, capacity, destination and site conditions. The request is routed to the IXORTA team with this division and model already identified.
Frequently asked questions about IX-WATER-LINE
What is the IX-WATER-LINE Water-Line Components used for?
Water-line components combine pressure regulation, medication housing, square pipe, nipple mounts and support parts into a serviceable poultry drinking circuit. Typical applications include cage drinking lines, floor-house nipple lines, medication circuits, replacement line sections.
How does the IX-WATER-LINE work?
Filtered inlet water passes through the regulator and optional medicator, then along supported square pipe to nipples and end flushing points.
What are the catalogue specifications for IX-WATER-LINE?
Core components is Water Matic, nipple bodies, spring bowl, PVC muff and square pipe; Pipe section is 22 × 22 mm square PVC; Pipe lengths is 3 m and 6 m catalogue options; Configuration is Project designed. These are catalogue-listed reference values and must be confirmed in the final quotation.
What information should a buyer send for a IX-WATER-LINE quotation?
Send the application, required capacity, materials or operating conditions, utilities, destination country and port, site constraints, preferred options, project timing and installation expectations.
What should be checked before shipment?
The agreed configuration, safety equipment, dimensions, utilities, documentation, factory acceptance scope, packing, spare-parts list, installation responsibilities and destination requirements should be recorded before release.
Source and verification
This article is based on the IXORTA 2026 IXORTA Poultry & Feed catalogue. Final technical values, options, compliance, availability and performance acceptance criteria must be confirmed in the signed quotation.