IX-FEED-SILO Galvanized Feed Silos Specifications, Operation & Selection Guide
A galvanized feed silo stores bulk feed or ingredients and discharges them into an auger or conveying system while protecting material from weather and contamination.
What is IX-FEED-SILO?
IX-FEED-SILO is an IXORTA galvanized feed silos. A galvanized feed silo stores bulk feed or ingredients and discharges them into an auger or conveying system while protecting material from weather and contamination. Its principal catalogue values are Construction: Galvanized bolted panels; Fasteners: Catalogue-listed 8.8 bolts.
Start with the IXORTA Poultry & Feed product range, then use this model page to assess fit, operating needs and the information required for a quotation.
IX-FEED-SILO catalogue specifications
The values below come from the supplied 2026 IXORTA catalogue. Use them to build an initial shortlist, then confirm the exact configuration, options and acceptance criteria in the model-specific quotation.
| Construction | Galvanized bolted panels |
|---|---|
| Fasteners | Catalogue-listed 8.8 bolts |
| Roof and cone | 40° catalogue geometry |
| Support | One-piece legs and cross-bracing |
| Capacity | Project configured |
Before ordering: confirm the duty, usable capacity, overall dimensions, utilities, safety package, controls, attachments and documentation for the destination market. Download the division catalogue.
Where IX-FEED-SILO sits in the range
IX-FEED-SILO is the highest listed configuration in this 7-model range and should be assessed against site space, utilities, handling and transport limits.
Shortlist this model when the planned duty is close to its listed values. If the application regularly approaches a limit, compare the adjacent models below and ask IXORTA to check working margin, cycle expectations and future capacity.
How the IX-FEED-SILO works
Delivery fills the silo from a controlled inlet, material settles inside the cone and gravity feeds the outlet into the conveying line. Inspection, venting and safe access are part of operation.
The safe sequence depends on the supplied guards, controls, utilities and attachments. Operators should follow the delivered manual, training and site risk assessment. For process examples and planning articles, continue to the IXORTA Poultry & Feed industry guides.
Manufacturing and acceptance checks
Review galvanized sheets, bolted seams, legs and cross-bracing, roof and cone geometry, anti-drip details, inspection door, outlet and the foundation/interface calculations.
A useful factory-acceptance record identifies the agreed configuration, principal components, inspection points, test material or load, observed results, open actions, documentation set, packing method and release approval. See IXORTA Poultry & Feed project scopes for the wider delivery context.
Applications and selection questions
Typical applications
- poultry feed storage
- feed-mill ingredients
- farm buffer storage
- automated conveying
Confirm before selection
- required storage days
- feed density
- truck delivery method
- site wind and foundation
- outlet and auger route
- inspection and safe access
A catalogue capacity alone is not enough. IXORTA should receive the normal and peak operating range, site conditions, utilities, operator experience, destination and delivery constraints before recommending a configuration. Review the division buyer FAQs before sending the enquiry.
Practical working sequence
- Define the job. Record material, load, output, quality and environmental requirements.
- Inspect before start. Check guards, fluids, fasteners, tooling or attachments, connections and the work area.
- Set the equipment. Apply the model manual, verified program or calibrated field setting.
- Prove at low risk. Run a dry cycle, first part, clean-water test or short field pass as appropriate.
- Monitor production. Watch load, sound, temperature, quality, flow, alignment and safety devices.
- Close and record. Isolate safely, clean, inspect wear and log service actions.
Use the project enquiry form to identify any required training, commissioning or operator documentation.
Maintenance priorities
- inspect bolts and seams
- keep the roof and inlet weather-tight
- check cone and outlet for bridging
- inspect legs, bracing and foundation
Intervals depend on operating hours, duty, dust, heat, water quality and the surrounding environment. The delivered manual and component schedules control the final service plan. Send spare-parts and service questions through the IXORTA contact page.
Project planning for Saudi Arabia, the UAE, Iraq and hot-climate markets
Confirm bird type and age, house dimensions, summer design temperature, power and water reliability, ventilation duty, feed storage, emergency operation, automation level, biosecurity, inland route and installation responsibilities.
For a useful export quotation, include the destination port, inland route, unloading equipment, site access, local standards, document language, commissioning responsibility and critical spare-parts expectation. Browse regional project examples.
Request a IX-FEED-SILO quotation
Send the intended application, capacity, destination and site conditions. The request is routed to the IXORTA team with this division and model already identified.
Frequently asked questions about IX-FEED-SILO
What is the IX-FEED-SILO Galvanized Feed Silos used for?
A galvanized feed silo stores bulk feed or ingredients and discharges them into an auger or conveying system while protecting material from weather and contamination. Typical applications include poultry feed storage, feed-mill ingredients, farm buffer storage, automated conveying.
How does the IX-FEED-SILO work?
Delivery fills the silo from a controlled inlet, material settles inside the cone and gravity feeds the outlet into the conveying line. Inspection, venting and safe access are part of operation.
What are the catalogue specifications for IX-FEED-SILO?
Construction is Galvanized bolted panels; Fasteners is Catalogue-listed 8.8 bolts; Roof and cone is 40° catalogue geometry; Support is One-piece legs and cross-bracing; Capacity is Project configured. These are catalogue-listed reference values and must be confirmed in the final quotation.
What information should a buyer send for a IX-FEED-SILO quotation?
Send the application, required capacity, materials or operating conditions, utilities, destination country and port, site constraints, preferred options, project timing and installation expectations.
What should be checked before shipment?
The agreed configuration, safety equipment, dimensions, utilities, documentation, factory acceptance scope, packing, spare-parts list, installation responsibilities and destination requirements should be recorded before release.
Source and verification
This article is based on the IXORTA 2026 IXORTA Poultry & Feed catalogue. Final technical values, options, compliance, availability and performance acceptance criteria must be confirmed in the signed quotation.