IX-SG-4080 Surface Grinding Machine Specifications, Operation & Selection Guide
A surface grinder uses a rotating abrasive wheel and controlled table motion to produce flat, accurate metal surfaces.
What is IX-SG-4080?
IX-SG-4080 is an IXORTA surface grinding machine. A surface grinder uses a rotating abrasive wheel and controlled table motion to produce flat, accurate metal surfaces. Its principal catalogue values are Grinding area: 400 × 800 mm; Motor power: 4.0 kW.
Start with the IXORTA CNC product range, then use this model page to assess fit, operating needs and the information required for a quotation.
IX-SG-4080 catalogue specifications
The values below come from the supplied 2026 IXORTA catalogue. Use them to build an initial shortlist, then confirm the exact configuration, options and acceptance criteria in the model-specific quotation.
| Grinding area | 400 × 800 mm |
|---|---|
| Motor power | 4.0 kW |
| Maximum work height | 400 mm |
Before ordering: confirm the duty, usable capacity, overall dimensions, utilities, safety package, controls, attachments and documentation for the destination market. Download the division catalogue.
Where IX-SG-4080 sits in the range
IX-SG-4080 is the highest listed configuration in this 2-model range and should be assessed against site space, utilities, handling and transport limits.
Shortlist this model when the planned duty is close to its listed values. If the application regularly approaches a limit, compare the adjacent models below and ask IXORTA to check working margin, cycle expectations and future capacity.
How the IX-SG-4080 works
The workpiece is secured on the table or magnetic chuck, the wheel is dressed, and small controlled down-feeds are applied while the table traverses under the wheel. Coolant and measured checks protect finish and geometry.
The safe sequence depends on the supplied guards, controls, utilities and attachments. Operators should follow the delivered manual, training and site risk assessment. For process examples and planning articles, continue to the IXORTA CNC industry guides.
Manufacturing and acceptance checks
Review base rigidity, table straightness, spindle condition, chuck flatness, wheel guarding, lubrication, coolant delivery and a ground test coupon.
A useful factory-acceptance record identifies the agreed configuration, principal components, inspection points, test material or load, observed results, open actions, documentation set, packing method and release approval. See IXORTA CNC project scopes for the wider delivery context.
Applications and selection questions
Typical applications
- tool-room finishing
- flatness correction
- die and mould work
- precision surface preparation
Confirm before selection
- grinding area
- maximum work height
- material and wheel choice
- finish and flatness target
- coolant needs
- manual or automatic cycles
A catalogue capacity alone is not enough. IXORTA should receive the normal and peak operating range, site conditions, utilities, operator experience, destination and delivery constraints before recommending a configuration. Review the division buyer FAQs before sending the enquiry.
Practical working sequence
- Define the job. Record material, load, output, quality and environmental requirements.
- Inspect before start. Check guards, fluids, fasteners, tooling or attachments, connections and the work area.
- Set the equipment. Apply the model manual, verified program or calibrated field setting.
- Prove at low risk. Run a dry cycle, first part, clean-water test or short field pass as appropriate.
- Monitor production. Watch load, sound, temperature, quality, flow, alignment and safety devices.
- Close and record. Isolate safely, clean, inspect wear and log service actions.
Use the project enquiry form to identify any required training, commissioning or operator documentation.
Maintenance priorities
- dress and inspect the wheel
- keep table and chuck clean
- check lubrication and coolant
- verify guards before each shift
Intervals depend on operating hours, duty, dust, heat, water quality and the surrounding environment. The delivered manual and component schedules control the final service plan. Send spare-parts and service questions through the IXORTA contact page.
Configuration planning for Saudi Arabia, the UAE, Russia and Central Asia
Confirm workpiece material and size, output target, electrical supply, ambient factory temperature, controller preference, tooling, extraction or coolant duties, operator skills, destination port and inland delivery route.
For a useful export quotation, include the destination port, inland route, unloading equipment, site access, local standards, document language, commissioning responsibility and critical spare-parts expectation. Browse regional project examples.
Request a IX-SG-4080 quotation
Send the intended application, capacity, destination and site conditions. The request is routed to the IXORTA team with this division and model already identified.
Frequently asked questions about IX-SG-4080
What is the IX-SG-4080 Surface Grinding Machine used for?
A surface grinder uses a rotating abrasive wheel and controlled table motion to produce flat, accurate metal surfaces. Typical applications include tool-room finishing, flatness correction, die and mould work, precision surface preparation.
How does the IX-SG-4080 work?
The workpiece is secured on the table or magnetic chuck, the wheel is dressed, and small controlled down-feeds are applied while the table traverses under the wheel. Coolant and measured checks protect finish and geometry.
What are the catalogue specifications for IX-SG-4080?
Grinding area is 400 × 800 mm; Motor power is 4.0 kW; Maximum work height is 400 mm. These are catalogue-listed reference values and must be confirmed in the final quotation.
What information should a buyer send for a IX-SG-4080 quotation?
Send the application, required capacity, materials or operating conditions, utilities, destination country and port, site constraints, preferred options, project timing and installation expectations.
What should be checked before shipment?
The agreed configuration, safety equipment, dimensions, utilities, documentation, factory acceptance scope, packing, spare-parts list, installation responsibilities and destination requirements should be recorded before release.
Source and verification
This article is based on the IXORTA 2026 IXORTA CNC catalogue. Final technical values, options, compliance, availability and performance acceptance criteria must be confirmed in the signed quotation.