IX-RT-1325 CNC Router Specifications, Operation & Selection Guide
A CNC router uses a high-speed spindle and programmed multi-axis motion to cut, drill and profile sheet or panel materials held on a worktable.
What is IX-RT-1325?
IX-RT-1325 is an IXORTA cnc router. A CNC router uses a high-speed spindle and programmed multi-axis motion to cut, drill and profile sheet or panel materials held on a worktable. Its principal catalogue values are Working area: 1300 × 2500 mm; Spindle power: 9.0 kW.
Start with the IXORTA CNC product range, then use this model page to assess fit, operating needs and the information required for a quotation.
IX-RT-1325 catalogue specifications
The values below come from the supplied 2026 IXORTA catalogue. Use them to build an initial shortlist, then confirm the exact configuration, options and acceptance criteria in the model-specific quotation.
| Working area | 1300 × 2500 mm |
|---|---|
| Spindle power | 9.0 kW |
| Tool capacity | 8 tools |
| Spindle speed | 18000 rpm |
Before ordering: confirm the duty, usable capacity, overall dimensions, utilities, safety package, controls, attachments and documentation for the destination market. Download the division catalogue.
Where IX-RT-1325 sits in the range
IX-RT-1325 is the first configuration in a 4-model range; buyers should compare it with the larger listed alternatives when production or work-envelope needs may grow.
Shortlist this model when the planned duty is close to its listed values. If the application regularly approaches a limit, compare the adjacent models below and ask IXORTA to check working margin, cycle expectations and future capacity.
How the IX-RT-1325 works
Material is placed on the vacuum or fixture table, tools and zero points are checked, dust extraction is started and the program is proved. The spindle follows nested toolpaths while the automatic tool changer supports multi-operation jobs.
The safe sequence depends on the supplied guards, controls, utilities and attachments. Operators should follow the delivered manual, training and site risk assessment. For process examples and planning articles, continue to the IXORTA CNC industry guides.
Manufacturing and acceptance checks
Review frame squareness, table flatness and vacuum zones, gantry alignment, servo tuning, spindle runout, tool changer sequence, dust-collection interfaces and trial parts.
A useful factory-acceptance record identifies the agreed configuration, principal components, inspection points, test material or load, observed results, open actions, documentation set, packing method and release approval. See IXORTA CNC project scopes for the wider delivery context.
Applications and selection questions
Typical applications
- wood and MDF
- plastics
- aluminium sheet
- composite panels
Confirm before selection
- panel format and usable table
- material and tool diameter
- spindle power
- tool capacity
- vacuum-pump duty
- dust extraction
A catalogue capacity alone is not enough. IXORTA should receive the normal and peak operating range, site conditions, utilities, operator experience, destination and delivery constraints before recommending a configuration. Review the division buyer FAQs before sending the enquiry.
Practical working sequence
- Define the job. Record material, load, output, quality and environmental requirements.
- Inspect before start. Check guards, fluids, fasteners, tooling or attachments, connections and the work area.
- Set the equipment. Apply the model manual, verified program or calibrated field setting.
- Prove at low risk. Run a dry cycle, first part, clean-water test or short field pass as appropriate.
- Monitor production. Watch load, sound, temperature, quality, flow, alignment and safety devices.
- Close and record. Isolate safely, clean, inspect wear and log service actions.
Use the project enquiry form to identify any required training, commissioning or operator documentation.
Maintenance priorities
- clean collets and tool holders
- check vacuum seals and filters
- inspect dust-extraction hoses
- lubricate and clean guides as specified
Intervals depend on operating hours, duty, dust, heat, water quality and the surrounding environment. The delivered manual and component schedules control the final service plan. Send spare-parts and service questions through the IXORTA contact page.
Configuration planning for Saudi Arabia, the UAE, Russia and Central Asia
Confirm workpiece material and size, output target, electrical supply, ambient factory temperature, controller preference, tooling, extraction or coolant duties, operator skills, destination port and inland delivery route.
For a useful export quotation, include the destination port, inland route, unloading equipment, site access, local standards, document language, commissioning responsibility and critical spare-parts expectation. Browse regional project examples.
Request a IX-RT-1325 quotation
Send the intended application, capacity, destination and site conditions. The request is routed to the IXORTA team with this division and model already identified.
Frequently asked questions about IX-RT-1325
What is the IX-RT-1325 CNC Router used for?
A CNC router uses a high-speed spindle and programmed multi-axis motion to cut, drill and profile sheet or panel materials held on a worktable. Typical applications include wood and MDF, plastics, aluminium sheet, composite panels.
How does the IX-RT-1325 work?
Material is placed on the vacuum or fixture table, tools and zero points are checked, dust extraction is started and the program is proved. The spindle follows nested toolpaths while the automatic tool changer supports multi-operation jobs.
What are the catalogue specifications for IX-RT-1325?
Working area is 1300 × 2500 mm; Spindle power is 9.0 kW; Tool capacity is 8 tools; Spindle speed is 18000 rpm. These are catalogue-listed reference values and must be confirmed in the final quotation.
What information should a buyer send for a IX-RT-1325 quotation?
Send the application, required capacity, materials or operating conditions, utilities, destination country and port, site constraints, preferred options, project timing and installation expectations.
What should be checked before shipment?
The agreed configuration, safety equipment, dimensions, utilities, documentation, factory acceptance scope, packing, spare-parts list, installation responsibilities and destination requirements should be recorded before release.
Source and verification
This article is based on the IXORTA 2026 IXORTA CNC catalogue. Final technical values, options, compliance, availability and performance acceptance criteria must be confirmed in the signed quotation.