IX-PL-1530 Plasma Cutting Machine Specifications, Operation & Selection Guide
A CNC plasma machine cuts conductive plate by directing an electrically generated high-temperature plasma arc along programmed profiles.
What is IX-PL-1530?
IX-PL-1530 is an IXORTA plasma cutting machine. A CNC plasma machine cuts conductive plate by directing an electrically generated high-temperature plasma arc along programmed profiles. Its principal catalogue values are Working area: 1500 × 3000 mm; Cutting thickness: 1–40 mm.
Start with the IXORTA CNC product range, then use this model page to assess fit, operating needs and the information required for a quotation.
IX-PL-1530 catalogue specifications
The values below come from the supplied 2026 IXORTA catalogue. Use them to build an initial shortlist, then confirm the exact configuration, options and acceptance criteria in the model-specific quotation.
| Working area | 1500 × 3000 mm |
|---|---|
| Cutting thickness | 1–40 mm |
| Plasma current | 80–200 A |
| Maximum speed | 20 m/min |
Before ordering: confirm the duty, usable capacity, overall dimensions, utilities, safety package, controls, attachments and documentation for the destination market. Download the division catalogue.
Where IX-PL-1530 sits in the range
IX-PL-1530 is the first configuration in a 2-model range; buyers should compare it with the larger listed alternatives when production or work-envelope needs may grow.
Shortlist this model when the planned duty is close to its listed values. If the application regularly approaches a limit, compare the adjacent models below and ask IXORTA to check working margin, cycle expectations and future capacity.
How the IX-PL-1530 works
Plate is loaded, torch consumables and air or gas supply are checked, the program is proved and automatic height control maintains the torch gap while the gantry follows the cut path.
The safe sequence depends on the supplied guards, controls, utilities and attachments. Operators should follow the delivered manual, training and site risk assessment. For process examples and planning articles, continue to the IXORTA CNC industry guides.
Manufacturing and acceptance checks
Acceptance should check frame and gantry squareness, torch carriage, height control response, grounding, cable management, fume or water-table interfaces and sample cuts.
A useful factory-acceptance record identifies the agreed configuration, principal components, inspection points, test material or load, observed results, open actions, documentation set, packing method and release approval. See IXORTA CNC project scopes for the wider delivery context.
Applications and selection questions
Typical applications
- carbon-steel plate
- fabrication blanks
- structural components
- general profile cutting
Confirm before selection
- plate size
- material and thickness
- power-source current
- cut-quality target
- fume control
- loading and unloading space
A catalogue capacity alone is not enough. IXORTA should receive the normal and peak operating range, site conditions, utilities, operator experience, destination and delivery constraints before recommending a configuration. Review the division buyer FAQs before sending the enquiry.
Practical working sequence
- Define the job. Record material, load, output, quality and environmental requirements.
- Inspect before start. Check guards, fluids, fasteners, tooling or attachments, connections and the work area.
- Set the equipment. Apply the model manual, verified program or calibrated field setting.
- Prove at low risk. Run a dry cycle, first part, clean-water test or short field pass as appropriate.
- Monitor production. Watch load, sound, temperature, quality, flow, alignment and safety devices.
- Close and record. Isolate safely, clean, inspect wear and log service actions.
Use the project enquiry form to identify any required training, commissioning or operator documentation.
Maintenance priorities
- inspect torch consumables
- clean rails and drive surfaces
- check grounding and cable condition
- service extraction or water table
Intervals depend on operating hours, duty, dust, heat, water quality and the surrounding environment. The delivered manual and component schedules control the final service plan. Send spare-parts and service questions through the IXORTA contact page.
Configuration planning for Saudi Arabia, the UAE, Russia and Central Asia
Confirm workpiece material and size, output target, electrical supply, ambient factory temperature, controller preference, tooling, extraction or coolant duties, operator skills, destination port and inland delivery route.
For a useful export quotation, include the destination port, inland route, unloading equipment, site access, local standards, document language, commissioning responsibility and critical spare-parts expectation. Browse regional project examples.
Request a IX-PL-1530 quotation
Send the intended application, capacity, destination and site conditions. The request is routed to the IXORTA team with this division and model already identified.
Frequently asked questions about IX-PL-1530
What is the IX-PL-1530 Plasma Cutting Machine used for?
A CNC plasma machine cuts conductive plate by directing an electrically generated high-temperature plasma arc along programmed profiles. Typical applications include carbon-steel plate, fabrication blanks, structural components, general profile cutting.
How does the IX-PL-1530 work?
Plate is loaded, torch consumables and air or gas supply are checked, the program is proved and automatic height control maintains the torch gap while the gantry follows the cut path.
What are the catalogue specifications for IX-PL-1530?
Working area is 1500 × 3000 mm; Cutting thickness is 1–40 mm; Plasma current is 80–200 A; Maximum speed is 20 m/min. These are catalogue-listed reference values and must be confirmed in the final quotation.
What information should a buyer send for a IX-PL-1530 quotation?
Send the application, required capacity, materials or operating conditions, utilities, destination country and port, site constraints, preferred options, project timing and installation expectations.
What should be checked before shipment?
The agreed configuration, safety equipment, dimensions, utilities, documentation, factory acceptance scope, packing, spare-parts list, installation responsibilities and destination requirements should be recorded before release.
Source and verification
This article is based on the IXORTA 2026 IXORTA CNC catalogue. Final technical values, options, compliance, availability and performance acceptance criteria must be confirmed in the signed quotation.