IX-PB-220/4000 Press Brake Specifications, Operation & Selection Guide
A press brake forms sheet or plate by driving a punch into a matched die under controlled force and backgauge position.
What is IX-PB-220/4000?
IX-PB-220/4000 is an IXORTA press brake. A press brake forms sheet or plate by driving a punch into a matched die under controlled force and backgauge position. Its principal catalogue values are Press force: 220 ton; Bending length: 4000 mm.
Start with the IXORTA CNC product range, then use this model page to assess fit, operating needs and the information required for a quotation.
IX-PB-220/4000 catalogue specifications
The values below come from the supplied 2026 IXORTA catalogue. Use them to build an initial shortlist, then confirm the exact configuration, options and acceptance criteria in the model-specific quotation.
| Press force | 220 ton |
|---|---|
| Bending length | 4000 mm |
| Stroke | 250 mm |
| Motor power | 18.5 kW |
Before ordering: confirm the duty, usable capacity, overall dimensions, utilities, safety package, controls, attachments and documentation for the destination market. Download the division catalogue.
Where IX-PB-220/4000 sits in the range
IX-PB-220/4000 is the highest listed configuration in this 2-model range and should be assessed against site space, utilities, handling and transport limits.
Shortlist this model when the planned duty is close to its listed values. If the application regularly approaches a limit, compare the adjacent models below and ask IXORTA to check working margin, cycle expectations and future capacity.
How the IX-PB-220/4000 works
The operator selects rated tooling, programs bend sequence and backgauge positions, verifies material and safe clearances, then performs a controlled first-piece bend before production.
The safe sequence depends on the supplied guards, controls, utilities and attachments. Operators should follow the delivered manual, training and site risk assessment. For process examples and planning articles, continue to the IXORTA CNC industry guides.
Manufacturing and acceptance checks
Review frame alignment, ram guidance, hydraulic or drive system, backgauge repeatability, tooling interfaces, guarding and safety devices, then verify bends across the useful length.
A useful factory-acceptance record identifies the agreed configuration, principal components, inspection points, test material or load, observed results, open actions, documentation set, packing method and release approval. See IXORTA CNC project scopes for the wider delivery context.
Applications and selection questions
Typical applications
- sheet-metal bending
- enclosures
- fabricated frames
- production forming
Confirm before selection
- required tonnage
- bend length
- material and thickness
- stroke and daylight
- tooling
- backgauge axes and safety
A catalogue capacity alone is not enough. IXORTA should receive the normal and peak operating range, site conditions, utilities, operator experience, destination and delivery constraints before recommending a configuration. Review the division buyer FAQs before sending the enquiry.
Practical working sequence
- Define the job. Record material, load, output, quality and environmental requirements.
- Inspect before start. Check guards, fluids, fasteners, tooling or attachments, connections and the work area.
- Set the equipment. Apply the model manual, verified program or calibrated field setting.
- Prove at low risk. Run a dry cycle, first part, clean-water test or short field pass as appropriate.
- Monitor production. Watch load, sound, temperature, quality, flow, alignment and safety devices.
- Close and record. Isolate safely, clean, inspect wear and log service actions.
Use the project enquiry form to identify any required training, commissioning or operator documentation.
Maintenance priorities
- inspect tooling and clamping
- check hydraulic oil and leaks
- verify guarding and safety systems
- keep backgauge guides clean
Intervals depend on operating hours, duty, dust, heat, water quality and the surrounding environment. The delivered manual and component schedules control the final service plan. Send spare-parts and service questions through the IXORTA contact page.
Configuration planning for Saudi Arabia, the UAE, Russia and Central Asia
Confirm workpiece material and size, output target, electrical supply, ambient factory temperature, controller preference, tooling, extraction or coolant duties, operator skills, destination port and inland delivery route.
For a useful export quotation, include the destination port, inland route, unloading equipment, site access, local standards, document language, commissioning responsibility and critical spare-parts expectation. Browse regional project examples.
Request a IX-PB-220/4000 quotation
Send the intended application, capacity, destination and site conditions. The request is routed to the IXORTA team with this division and model already identified.
Frequently asked questions about IX-PB-220/4000
What is the IX-PB-220/4000 Press Brake used for?
A press brake forms sheet or plate by driving a punch into a matched die under controlled force and backgauge position. Typical applications include sheet-metal bending, enclosures, fabricated frames, production forming.
How does the IX-PB-220/4000 work?
The operator selects rated tooling, programs bend sequence and backgauge positions, verifies material and safe clearances, then performs a controlled first-piece bend before production.
What are the catalogue specifications for IX-PB-220/4000?
Press force is 220 ton; Bending length is 4000 mm; Stroke is 250 mm; Motor power is 18.5 kW. These are catalogue-listed reference values and must be confirmed in the final quotation.
What information should a buyer send for a IX-PB-220/4000 quotation?
Send the application, required capacity, materials or operating conditions, utilities, destination country and port, site constraints, preferred options, project timing and installation expectations.
What should be checked before shipment?
The agreed configuration, safety equipment, dimensions, utilities, documentation, factory acceptance scope, packing, spare-parts list, installation responsibilities and destination requirements should be recorded before release.
Source and verification
This article is based on the IXORTA 2026 IXORTA CNC catalogue. Final technical values, options, compliance, availability and performance acceptance criteria must be confirmed in the signed quotation.