IX-AG-WT12 Walking Tractor Specifications, Operation & Selection Guide
A walking tractor is a compact two-wheel power unit guided by an operator for small-field tillage and compatible attachments.
What is IX-AG-WT12?
IX-AG-WT12 is an IXORTA walking tractor. A walking tractor is a compact two-wheel power unit guided by an operator for small-field tillage and compatible attachments. Its principal catalogue values are Rated power: 12 HP; Transmission: 2F + 1R.
Start with the IXORTA Agriculture product range, then use this model page to assess fit, operating needs and the information required for a quotation.
IX-AG-WT12 catalogue specifications
The values below come from the supplied 2026 IXORTA catalogue. Use them to build an initial shortlist, then confirm the exact configuration, options and acceptance criteria in the model-specific quotation.
| Rated power | 12 HP |
|---|---|
| Transmission | 2F + 1R |
| Working width | 900–1000 mm |
| Weight | 130 kg |
Before ordering: confirm the duty, usable capacity, overall dimensions, utilities, safety package, controls, attachments and documentation for the destination market. Download the division catalogue.
Where IX-AG-WT12 sits in the range
IX-AG-WT12 sits between the smaller and larger configurations in this 3-model range, making side-by-side specification comparison especially important.
Shortlist this model when the planned duty is close to its listed values. If the application regularly approaches a limit, compare the adjacent models below and ask IXORTA to check working margin, cycle expectations and future capacity.
How the IX-AG-WT12 works
The operator checks controls, fuel, oil and attachment security, selects a low gear, engages drive gradually and walks behind the machine while maintaining safe spacing and a stable working depth.
The safe sequence depends on the supplied guards, controls, utilities and attachments. Operators should follow the delivered manual, training and site risk assessment. For process examples and planning articles, continue to the IXORTA Agriculture industry guides.
Manufacturing and acceptance checks
Pre-delivery review should cover engine mounting, transmission, clutch, handlebars and controls, wheel fitment, guards, attachment interface and a controlled operating test.
A useful factory-acceptance record identifies the agreed configuration, principal components, inspection points, test material or load, observed results, open actions, documentation set, packing method and release approval. See IXORTA Agriculture project scopes for the wider delivery context.
Applications and selection questions
Typical applications
- small plots
- vegetable production
- orchard rows
- light transport with compatible equipment
Confirm before selection
- plot size and slope
- soil resistance
- required working width
- attachment range
- operator ergonomics
- parts and service
A catalogue capacity alone is not enough. IXORTA should receive the normal and peak operating range, site conditions, utilities, operator experience, destination and delivery constraints before recommending a configuration. Review the division buyer FAQs before sending the enquiry.
Practical working sequence
- Define the job. Record material, load, output, quality and environmental requirements.
- Inspect before start. Check guards, fluids, fasteners, tooling or attachments, connections and the work area.
- Set the equipment. Apply the model manual, verified program or calibrated field setting.
- Prove at low risk. Run a dry cycle, first part, clean-water test or short field pass as appropriate.
- Monitor production. Watch load, sound, temperature, quality, flow, alignment and safety devices.
- Close and record. Isolate safely, clean, inspect wear and log service actions.
Use the project enquiry form to identify any required training, commissioning or operator documentation.
Maintenance priorities
- check oil and air filter
- inspect belts, clutch and cables
- tighten wheels and attachment bolts
- clean soil after use
Intervals depend on operating hours, duty, dust, heat, water quality and the surrounding environment. The delivered manual and component schedules control the final service plan. Send spare-parts and service questions through the IXORTA contact page.
Field planning for the Middle East, Africa, Russia and Central Asia
Match every machine to farm size, climate, soil, crop, tractor power, hitch, PTO or hydraulic flow, seasonal work window, inland transport, operator experience and first-season spare-parts access.
For a useful export quotation, include the destination port, inland route, unloading equipment, site access, local standards, document language, commissioning responsibility and critical spare-parts expectation. Browse regional project examples.
Request a IX-AG-WT12 quotation
Send the intended application, capacity, destination and site conditions. The request is routed to the IXORTA team with this division and model already identified.
Frequently asked questions about IX-AG-WT12
What is the IX-AG-WT12 Walking Tractor used for?
A walking tractor is a compact two-wheel power unit guided by an operator for small-field tillage and compatible attachments. Typical applications include small plots, vegetable production, orchard rows, light transport with compatible equipment.
How does the IX-AG-WT12 work?
The operator checks controls, fuel, oil and attachment security, selects a low gear, engages drive gradually and walks behind the machine while maintaining safe spacing and a stable working depth.
What are the catalogue specifications for IX-AG-WT12?
Rated power is 12 HP; Transmission is 2F + 1R; Working width is 900–1000 mm; Weight is 130 kg. These are catalogue-listed reference values and must be confirmed in the final quotation.
What information should a buyer send for a IX-AG-WT12 quotation?
Send the application, required capacity, materials or operating conditions, utilities, destination country and port, site constraints, preferred options, project timing and installation expectations.
What should be checked before shipment?
The agreed configuration, safety equipment, dimensions, utilities, documentation, factory acceptance scope, packing, spare-parts list, installation responsibilities and destination requirements should be recorded before release.
Source and verification
This article is based on the IXORTA 2026 IXORTA Agriculture catalogue. Final technical values, options, compliance, availability and performance acceptance criteria must be confirmed in the signed quotation.