IX-AG-SE11 Row Seeder Specifications, Operation & Selection Guide
A row seeder meters seed into evenly spaced furrows, controls planting depth and closes the soil for consistent crop establishment.
What is IX-AG-SE11?
IX-AG-SE11 is an IXORTA row seeder. A row seeder meters seed into evenly spaced furrows, controls planting depth and closes the soil for consistent crop establishment. Its principal catalogue values are Row count: 11; Row spacing: 70 cm.
Start with the IXORTA Agriculture product range, then use this model page to assess fit, operating needs and the information required for a quotation.
IX-AG-SE11 catalogue specifications
The values below come from the supplied 2026 IXORTA catalogue. Use them to build an initial shortlist, then confirm the exact configuration, options and acceptance criteria in the model-specific quotation.
| Row count | 11 |
|---|---|
| Row spacing | 70 cm |
| Hopper capacity | 300 L |
| Working width | 3.0 m |
| Tractor requirement | 40–60 HP |
Before ordering: confirm the duty, usable capacity, overall dimensions, utilities, safety package, controls, attachments and documentation for the destination market. Download the division catalogue.
Where IX-AG-SE11 sits in the range
IX-AG-SE11 is the sole catalogue model in this equipment group.
Shortlist this model when the planned duty is close to its listed values. If the application regularly approaches a limit, compare the adjacent models below and ask IXORTA to check working margin, cycle expectations and future capacity.
How the IX-AG-SE11 works
The operator matches hitch and tractor, selects seed plates or metering settings, calibrates output, sets depth and row units, then checks emergence conditions with a short field pass.
The safe sequence depends on the supplied guards, controls, utilities and attachments. Operators should follow the delivered manual, training and site risk assessment. For process examples and planning articles, continue to the IXORTA Agriculture industry guides.
Manufacturing and acceptance checks
Review frame, hopper, metering units, row openers, depth control, drive chains or shafts, closing components, guards and a calibration test.
A useful factory-acceptance record identifies the agreed configuration, principal components, inspection points, test material or load, observed results, open actions, documentation set, packing method and release approval. See IXORTA Agriculture project scopes for the wider delivery context.
Applications and selection questions
Typical applications
- row crops
- mechanised planting
- calibrated seed placement
- medium-field seeding
Confirm before selection
- crop and seed size
- row count and spacing
- field width
- hopper capacity
- tractor power
- soil and residue conditions
A catalogue capacity alone is not enough. IXORTA should receive the normal and peak operating range, site conditions, utilities, operator experience, destination and delivery constraints before recommending a configuration. Review the division buyer FAQs before sending the enquiry.
Practical working sequence
- Define the job. Record material, load, output, quality and environmental requirements.
- Inspect before start. Check guards, fluids, fasteners, tooling or attachments, connections and the work area.
- Set the equipment. Apply the model manual, verified program or calibrated field setting.
- Prove at low risk. Run a dry cycle, first part, clean-water test or short field pass as appropriate.
- Monitor production. Watch load, sound, temperature, quality, flow, alignment and safety devices.
- Close and record. Isolate safely, clean, inspect wear and log service actions.
Use the project enquiry form to identify any required training, commissioning or operator documentation.
Maintenance priorities
- empty and clean seed hoppers
- inspect metering and openers
- lubricate chains and bearings
- check row-unit alignment
Intervals depend on operating hours, duty, dust, heat, water quality and the surrounding environment. The delivered manual and component schedules control the final service plan. Send spare-parts and service questions through the IXORTA contact page.
Field planning for the Middle East, Africa, Russia and Central Asia
Match every machine to farm size, climate, soil, crop, tractor power, hitch, PTO or hydraulic flow, seasonal work window, inland transport, operator experience and first-season spare-parts access.
For a useful export quotation, include the destination port, inland route, unloading equipment, site access, local standards, document language, commissioning responsibility and critical spare-parts expectation. Browse regional project examples.
Request a IX-AG-SE11 quotation
Send the intended application, capacity, destination and site conditions. The request is routed to the IXORTA team with this division and model already identified.
Frequently asked questions about IX-AG-SE11
What is the IX-AG-SE11 Row Seeder used for?
A row seeder meters seed into evenly spaced furrows, controls planting depth and closes the soil for consistent crop establishment. Typical applications include row crops, mechanised planting, calibrated seed placement, medium-field seeding.
How does the IX-AG-SE11 work?
The operator matches hitch and tractor, selects seed plates or metering settings, calibrates output, sets depth and row units, then checks emergence conditions with a short field pass.
What are the catalogue specifications for IX-AG-SE11?
Row count is 11; Row spacing is 70 cm; Hopper capacity is 300 L; Working width is 3.0 m; Tractor requirement is 40–60 HP. These are catalogue-listed reference values and must be confirmed in the final quotation.
What information should a buyer send for a IX-AG-SE11 quotation?
Send the application, required capacity, materials or operating conditions, utilities, destination country and port, site constraints, preferred options, project timing and installation expectations.
What should be checked before shipment?
The agreed configuration, safety equipment, dimensions, utilities, documentation, factory acceptance scope, packing, spare-parts list, installation responsibilities and destination requirements should be recorded before release.
Source and verification
This article is based on the IXORTA 2026 IXORTA Agriculture catalogue. Final technical values, options, compliance, availability and performance acceptance criteria must be confirmed in the signed quotation.